Superserver 4120
    Modell 4120-RT8-F-M2
 
 Produkte    Systeme    2U    [4120-RT8-F-M2]


Symbolfotos
  Konfiguration


• AMD® Opteron 6344 (Abyu Dhabi) 12-Core
  CPU 2.60GHz, 16MB Cache, 115W

• 16GB DDR3 ECC 1333MHz (max. 128GB)

• 2x 250GB SATA (RAID)
• 6x 1TB SATA (RAID)

• Hardware SAS/SATA RAID Controller mit 1.6GHz
  Dualcore Prozessor und 512MB Cache
  Battery Backup

• 2U Rackgehäuse schwarz

• 8x 3.5" Hot Swap Einschübe SAS/SATA

• 3 Lüfter + 2 Netzteillüfter

• 700W hoch-effizientes Netzteil redundant

• AMD® SR5670 Chipset

• Dual Gigabit NIC On-Board

• IPMI Hardware-Fernwartung mit KVM
  (Funktion auch bei abgeschaltetem System)

• DVD-Laufwerk

• 2 Jahre Garantie (Bis 5 Jahre optional)

• bis 5 Jahre Vor-Ort Garantie optional


Jeder Server wird konfiguriert und betriebsbereit
geliefert! Komplette Installation vor Ort auf Anfrage!



Windows 2011 / 2008     Linux*     Hardware RAID     Rackmount-Ready    



  Product SKUs
 AS-4120-RT8-F-M2 SuperServer 4120-RT8-F (Black)
 
  Motherboard
 Opteron® 6000 Serverboard
 
  Processor & Cache
 CPU Single 1944-pin Socket G34
 Supports one 16/12/8/4-Core
  AMD Opteron™ 6000 Series
  processors
 HT3.0 Link support
 
  System Memory
 MemoryEight DIMM sockets
 CapacitySupport up to 128GB DDR3
  1333/1066/800 MHz memory
 Quad channel memory bus
 Recommended that
  memory are populated in groups of
  four of the same type
 MemoryDDR3 1333/1066/800 MHz Registered
 Type ECC Unbuffered ECC/non-ECC SDRAM
  72-bit, 240-pin gold-plated DIMMs
 DIMM Sizes1GB, 2GB, 4GB, 8GB, 16GB
 Memory1.35V or 1.5V
 Voltage 
  
  On-Board Devices
 ChipsetAMD chipset SR5650 + SP5100
 SATA (onboard)AMD SP5100 (RAID 0, 1, 10)
 IPMISupport for Intelligent Platform
  Management Interface v.2.0
 IPMI 2.0 with virtual media over
  LAN and KVM-over-LAN support
 Winbond® WPCM450 BMC
 NetworkTwo Intel® 82574L controller,
 Controllers Dual-Port Gigabit Ethernet
 10/100/1000BASE-T support
 GraphicsMatrox® G200 16MB DDR2
 Super I/OWinbond 83627 chip
 
  Add-On Devices
 SAS / SATA RAIDHigh Performance SAS RAID
  Controller 8-Port PCI-E/8x
  with 1.6GHz Dualcore Prozessor
 RAID 0/1/1E/5/5EE/6/10/50/60/JBOD
 Global Hot Spare Supported
 512MB DDR2 Cache
 8 internal SAS/SATA HDDs supported
 Online Capacity Expansion and
  RAID Level Migration
 Battery Pack
 
  Expansion Slots
 PCI-Express2 PCI-E x8
 1 PCI-E x4
 3 PCI 3.3V
 
  Input / Output
 SATASix Serial ATA ports
 onboardSix internal SATA HDDs
  supported
 LAN2x RJ45 LAN port
 1x RJ45 dedicated IPMI LAN port
 USB2x USB rear ports
 2x USB on-board
 4x USB internal headers OR
  2x USB internal headers +
  2x USB front ports (optional)
 Total 8x USB 2.0 Compliant
 VGA1x VGA Port
 Keyboard /PS/2 keyboard and mouse ports
 Mouse 
 Serial Ports/1x Fast UART 16550 serial rear port
 Header1x Fast UART 16550 serial header OR
  1x Fast UART 16550 serial front port
 
  System BIOS
 BIOS Type16Mb Flash EEPROM with AMI® BIOS
 BIOSPlug and Play (PnP)
 FeaturesDMI 2.3
 PCI 2.2
 ACPI 2.0
 USB Keyboard Support
 SMBIOS 2.3
 
  Chassis
 Form Factor2U Chassis
 
  Dimensions
 Height89mm
 Width437mm
 Depth648mm
 Weight~27kg (depends on Config)
 Available ColorsBlack
 
  Front Panel
 ButtonsPower On/Off button
 System Reset button
 LEDsPower LED
 Hard drive activity LED
 2x Network activity LEDs
 System Overheat LED
 Power fail LED
 Ports2x USB front ports +
  DB9 COM front port (optional)
 
  Drive Bays
 Hot-swap Bays8x 3.5" SAS / SATA
  Hot-Swap drive bays
 Peripheral Bay1x Slim DVD Drive Bay
 1x Slim port tray
 
  Peripheral Drives
 DVDDVD ROM Drive
 
  System Cooling
 Fans3x 80mm 6300 RPM fans
 2x Power Supply Fan
 
  SAS / SATA Backplane
 1x 2U SAS / SATA backplane w/ Enclosure Management
 
  Power Supply
 700W (1 + 1) Redundant AC-DC high-efficiency power
 supply w/ PFC
 AC Voltage100 - 240V, 60-50Hz, 10 - 4 Amp
 +5V standby4.0 Amp
 +12V57.0 Amp
 +5V30.0 Amp
 +3.3V24.0 Amp
 -12V0.6 Amp
 
  Management
 SoftwareSuper Doctor III
 Power ACPI Power Management
 ConfigurationsWake-On-LAN (WOL) header
 Keyboard Wakeup from Soft-Off
 Power-on mode control for AC
  power loss recovery
 
  PC Health Monitoring
 CPUMonitors CPU Core Voltages, +1.8V,
  +3.3V, +5V, ±12V, +3.3V Standby,
  VBAT, HT, memory, chipset
 CPU switching voltage regulator
 FANUp to 6-fan status tachometer monitoring
 Up to six 4-pin fan headers
 Status monitor for speed control
 3-pin fan support (w/o speed control)
 Low noise fan speed control
   (4-pin fan only)
 Pulse Width Modulated (PWM) fan
  connectors
 TemperatureMonitoring for CPU and chassis
  environment
 CPU thermal trip support
 Thermal Control for 6x Fan Connectors
 I2C Temperature Sensing Logic
 LEDCPU / System Overheat LED
 +5V Standby Alert LED
 OtherChassis intrusion detection
 FeaturesChassis intrusion header
 

Druckfehler, Irrtum und techn. Änderung ohne Ankündigung vorbehalten. Genannte Preise sind empfohlene Verkaufspreise. Stand: 20.2.2014
* Kompatibel zu den gängigen Linux Derivaten. Bitte prüfen Sie ggf. Ihr Linux Derivat auf Unterstützung des RAID Controllers!