 |
Superserver 4420
Modell 4420-RT6-F-M5
| | |
Produkte
Systeme
2U
[4420-RT6-F-M5]
|
Symbolfotos
|
|
|
Konfiguration

• Quad AMD® Opteron 6386SE (Abu Dhabi)
16-Core CPUs 2.80GHz, (= 64 Cores)
je 16MB Cache, HT3.0 Link Support, je 140W

• 512GB DDR3 ECC 1333MHz

• 6x 120GB SSD (RAID)

• Hardware SAS/SATA RAID Controller mit
Triplecore Prozessor und 1GB Cache optional
inkl. Flash Cache Backup möglich

• 2U Rackgehäuse schwarz

• 6x 3.5" Hot Swap Einschübe SAS/SATA

• 6 Hot-Swap Lüfter + 4 Netzteillüfter

• 1400W hoch-effizientes Netzteil
(80plus Gold Level zertifiziert)

• AMD® SR5690 Chipset

• Dual Gigabit NIC On-Board
• Dual 8 Gigabit FC HCA (optional) ODER

• IPMI Hardware-Fernwartung mit KVM
(Funktion auch bei abgeschaltetem System)

• DVD-Laufwerk

• 2 Jahre Garantie (Bis 5 Jahre optional)

• bis 5 Jahre Vor-Ort Garantie optional

Jeder Server wird konfiguriert und betriebsbereit geliefert! Komplette Installation vor Ort auf Anfrage!
|
 | Windows 2011 / 2008 |
 | Linux* |
 | Hardware RAID |
 | Rackmount-Ready |
|
|
 |
 | Product SKUs |  |
AS-4420-RT6-F-M5 | | SuperServer 4420-RT6-F (Black) |
 |
|
 | Motherboard |  |
Quad Opteron® 6000 Serverboard |
 |
|
 | Processor & Cache |  |
CPU | • | Quad 1944-pin Socket G34 |
| • | Supports up to four Twelve/ |
| | Eight-Core ready AMD Opteron™ |
| | 6000 Series processors |
| • | HT3.0 Link support |
 |
|
 | System Memory |  |
Memory | • | Thirty-Two DIMM sockets |
Capacity | • | Support up to 512GB DDR3 Reg. ECC |
| | 1333/1066/800 MHz memory or 128GB |
| • | of DDR3 Unb. ECC/non-ECC memory |
| • | Quad channel memory bus |
| • | For Dual or Quad CPUs: Recommended |
| • | that memory be populated equally |
| | in adjacent memory banks |
 |
Memory | • | Registered ECC or unb. ECC / |
Type | | non-ECC DDR3 1333/1066/800 MHz |
| | SDRAM 72-bit, 240-pin DIMMs |
 |
DIMM Sizes | • | 1GB, 2GB, 4GB, 8GB, 16GB |
 |
Memory | • | 1.35V or 1.5V |
Voltage | | |
 |
| | |
 | On-Board Devices |  |
Chipset | • | AMD SR5690/SR5670/SP5100 Chipset |
 |
SATA (onboard) | • | AMD SP5100 (RAID 0, 1, 10) |
 |
IPMI | • | Support for Intelligent Platform |
| | Management Interface v.2.0 |
| • | IPMI 2.0 with virtual media over |
| | LAN and KVM-over-LAN support |
| • | Winbond® WPCM450 BMC |
 |
Network | • | Intel® 82576 controller, Dual-Port |
Controllers | | Gigabit Ethernet |
| • | 10/100/1000BASE-T support |
 |
Graphics | • | Matrox® G200 16MB DDR2 |
 |
Super I/O | • | Winbond 83627 chip |
 |
|
 | Add-On Devices |  |
8 Gbit | • | Negotiation: |
Fibrechannel | | 8/4/2Gbps auto-negotiation |
| • | IOPS: 200,000 initiator |
| | and target IOPS per port |
| • | Class of service: |
| | Class 2 and 3 |
| • | Topology: FC-AL, FC-AL2, |
| | point-to-point, switched fabric |
| | Protocols |
| • | FCP-3-SCSI, FC-Tape (FCP-2) |
| • | Dual 8Gbps Fibre Channel |
| • | SFP+ with LC-style connector |
| • | Power consumption: |
| | 6.2 Watts (typical) |
| • | APIs: |
| | SNIA HBA API V2, SMI-S, FDMI |
 |
SAS / SATA RAID | • | High Performance SAS-3 RAID |
| | Controller 8-Port PCI-E 3.0 x8 |
| | with Triplecore Prozessor |
| • | RAID 0/1/1E/5/5EE/6/10/50/60/JBOD |
| • | Global Hot Spare Supported |
| • | 1GB Cache |
| • | 6 internal SAS-3/SATA-3 HDDs supported |
| • | Online Capacity Expansion and |
| | RAID Level Migration |
| • | Support for SAS-3 expander |
 |
|
 | Expansion Slots |  |
PCI-Express | • | 2x PCI-e 2.0 x16 |
| • | 2x PCI-e 2.0 x8 (2x in use) |
| • | 1x UIO slot |
 |
|
 | Input / Output |  |
SATA | • | Six Serial ATA ports |
onboard | • | Six internal SATA HDDs supported |
 |
LAN | • | 2x RJ45 LAN port |
| • | 1x RJ45 dedicated IPMI LAN port |
 |
USB | • | 2x USB rear ports |
| • | 1x USB on-board |
| • | 4x USB internal headers OR |
| | 2x USB internal headers + |
| | 2x USB front ports (optional) |
| • | Total 7x USB 2.0 Compliant |
 |
VGA | • | 1x VGA Port |
 |
Keyboard / | • | PS/2 keyboard and mouse ports |
Mouse | | |
 |
Serial Ports/ | • | 1x Fast UART 16550 serial rear port |
Header | • | 1x Fast UART 16550 serial header OR |
| | 1x Fast UART 16550 serial front port |
 |
|
 |
 | System BIOS |  |
BIOS Type | • | 16Mb SPI Flash ROM with AMI® BIOS |
 |
BIOS | • | Plug and Play (PnP) |
Features | • | DMI 2.3 |
| • | PCI 2.2 |
| • | ACPI 2.0 |
| • | USB Keyboard Support |
| • | SMBIOS 2.3 |
 |
|
 | Chassis |  |
Form Factor | • | 2U Chassis |
 |
|
 | Dimensions |  |
Height | • | 89mm |
 |
Width | • | 437mm |
 |
Depth | • | 709mm |
 |
Weight | • | ~35kg (depends on Config) |
 |
Available Colors | • | Black |
 |
|
 | Front Panel |  |
Buttons | • | Power On/Off button |
| • | System Reset button |
 |
LEDs | • | Power LED |
| • | Hard drive activity LED |
| • | 2x Network activity LEDs |
| • | System Overheat LED |
| • | Power fail LED |
 |
Ports | • | 2x USB & DB9 COM port |
| | (Optional) |
 |
|
 | Drive Bays |  |
Hot-swap Bays | • | 6x 3.5" SAS / SATA Hot-swap drive |
| | bays |
 |
Peripheral Bay | • | 1x Slim DVD Drive Bay |
| • | 1x Slim port tray |
 |
|
 | Peripheral Drives |  |
DVD | • | DVD ROM Drive (optional) |
 |
|
 | System Cooling |  |
Fans | • | 6x 80mm 6500 RPM fans |
| • | 4x Power Supply Fan |
 |
|
 | SAS / SATA Backplane |  |
1x 2U SAS / SATA backplane w/ SES-II |
 |
|
 | Power Supply |  |
1400W high-efficiency power supply with PMBus |
 |
AC Voltage | • | 180 - 240V, 50 - 60Hz, 7.2-9.5Amp |
 |
+5V standby | • | 6 Amp |
 |
+12V | • | 116 Amp |
 |
|
 | Management |  |
Software | • | Super Doctor III |
 |
Power | • | ACPI Power Management |
Configurations | • | Wake-On-LAN (WOL) header |
| • | Keyboard Wakeup from Soft-Off |
| • | Power-on mode control for AC |
| | power loss recovery |
 |
|
 | PC Health Monitoring |  |
CPU | • | Monitors CPU Core Voltages, +1.8V, |
| | +3.3V, +5V, ±12V, +3.3V Standby, -12V |
| | Standby, VBAT, HT, memory, chipset |
| • | CPU switching voltage regulator |
 |
FAN | • | Up to 9-fan status tachometer monitoring |
| • | Up to nine 4-pin fan headers |
| • | Status monitor for speed control |
| • | 3-pin fan support (w/o speed control) |
| • | Low noise fan speed control |
| | (4-pin fan only) |
| • | Pulse Width Modulated (PWM) fan |
| | connectors |
 |
Temperature | • | Monitoring for CPU and chassis |
| | environment |
| • | CPU Thermal Trip Support |
| • | Thermal control for 9x fan connectors |
| • | I2C Temperature Sensing Logic |
 |
LED | • | CPU / System Overheat LED |
| • | +5V Standby Alert LED |
 |
Other | • | Chassis intrusion detection |
Features | • | Chassis intrusion header |
 |
|
|
|
|
|
|
Druckfehler, Irrtum und techn. Änderung ohne Ankündigung vorbehalten. Genannte Preise sind empfohlene Verkaufspreise. Stand: 16.6.2016 * Kompatibel zu den gängigen Linux Derivaten. Bitte prüfen Sie ggf. Ihr Linux Derivat auf Unterstützung des RAID Controllers!
|
|