 | Product SKUs (Basismodell) |  |
AS-4110-F2B-F | | SuperServer 4110-F2B-F (Black) |
 |
|
 | Motherboard |  |
Single Opteron® 6000 Serverboard |
 |
|
 | Processor & Cache |  |
CPU | • | Single 1944-pin Socket G34 |
| • | Supports one 16/12/8/4-Core |
| | AMD Opteron™ 6000 Series processors |
| • | HT3.0 Link support |
 |
|
 | System Memory |  |
Memory | • | Eight DIMM sockets |
Capacity | • | Support up to 128GB DDR3 |
| | 1333/1066/800 MHz memory |
| • | Quad channel memory bus |
 |
Memory | • | DDR3 1333/1066/800 MHz Registered |
Type | | ECC SDRAM or Unbuffered ECC/non-ECC |
| | 72-bit, 240-pin gold-plated DIMMs |
 |
DIMM Sizes | • | 1GB, 2GB, 4GB, 8GB, 16GB |
 |
Memory | • | 1.35V or 1.5V |
Voltage | | |
 |
|
 | On-Board Devices |  |
Chipset | • | AMD chipset SR5650 + SP5100 |
 |
SATA | • | AMD SP5100 (RAID 0, 1, 10) |
 |
IPMI | • | Support for Intelligent Platform |
| | Management Interface v.2.0 |
| • | IPMI 2.0 with virtual media over LAN |
| | and KVM over LAN support |
| • | Winbond® WPCM450 BMC |
 |
Network | • | Two Intel® 82574L controller, |
Controllers | | Dual-Port, Gigabit Ethernet |
| • | 10/100/1000BASE-T support |
 |
Graphics | • | Matrox® G200 16MB DDR2 |
 |
Super I/O | • | Winbond® 83627 chip |
 |
|
 | Add-On Devices (depends on config) |  |
SAS / SATA RAID | • | High Performance SAS RAID |
| | Controller 4-Port PCI-E/8x |
| | with Prozessor |
| • | RAID 0/1/10/JBOD |
| • | Global Hot Spare Supported |
| • | 128MB DDR2 Cache |
| • | 2 internal SAS/SATA HDDs supported |
| • | Online Capacity Expansion and |
| | RAID Level Migration |
 |
|
 | Expansion Slots |  |
PCI-Express | • | 1 (x16) PCI-e 2.0 slot |
| | (Riser card required) |
 |
|
 | Input / Output |  |
Serial ATA | • | Six SATA2.0 (3Gb/s) Ports |
 |
LAN | • | 2 RJ45 LAN ports |
| • | 1 RJ45 Dedicated LAN supports IPMI |
 |
USB | • | 2x USB rear ports |
| • | 2x USB on-board |
| • | 2x USB internal header |
| • | 2x USB front ports |
| • | Total 8 USB 2.0 Compliant |
 |
VGA | • | 1x VGA Port |
 |
Keyboard / | • | PS/2 keyboard and mouse ports |
Mouse | | |
 |
Serial Ports/ | • | 1x Fast UART 16550 rear port |
Header | | 1x Fast UART 16550 front port |
 |
|
|
 |
 | System BIOS |  |
BIOS Type | • | 16Mb SPI Flash ROM with AMI® BIOS |
 |
BIOS | • | Plug and Play (PnP) |
Features | • | DMI 2.3 |
| • | PCI 2.2 |
| • | ACPI 2.0 |
| • | USB Keyboard Support |
| • | SMBIOS 2.3 |
 |
|
 | Chassis |  |
Form Factor | • | 1U-Mini Rackmount Chassis |
 |
|
 | Dimensions |  |
Height | • | 43mm |
 |
Width | • | 437mm |
 |
Depth | • | 369mm |
 |
Weight | • | ~10kg (depends on Config) |
 |
Available Colors | • | Black |
 |
|
 | Front Panel |  |
Buttons | • | Power On/Off button |
| • | Reset button |
 |
LEDs | • | Power LED |
| • | Hard drive activity LED |
| • | 2x Network activity LEDs |
| • | System Overheat LED |
 |
|
 | Drive Bays |  |
Internal Bay | • | 2x 3.5" internal drive bays |
 |
Peripheral Bays | • | 1x Slim DVD Drive Bay |
 |
|
 | Peripheral Drives (depends on config) |  |
DVD | • | Slim 8x DVD Drive (optional) |
 |
|
 | System Cooling |  |
Fans | • | 2x 4cm PWM fans |
| • | 1x Power Supply Fan |
 |
|
 | Rackmount Options |  |
Rails | • | Rail Kit (Optional) |
 |
|
 | Expansion Slots |  |
1x full-height half-length expansion slot (Riser Card Required) |
 |
|
 | Power Supply |  |
350W AC power supply w/ PFC |
 |
AC Voltage | • | 100-240 V, 50-60 Hz, 4.2-1.8 Amp |
 |
+5V | • | 18 Amp |
 |
+5V standby | • | 3.0 Amp |
 |
+12V | • | 29 Amp |
 |
+3.3V | • | 15 Amp |
 |
|
 | Management |  |
Software | • | IPMI (Intelligent Platform Management |
| | Interface) 2.0 with KVM support |
| • | Super Doctor III |
 |
Power | • | ACPI Power Management |
Configurations | • | Wake-On-LAN (WOL) header |
| • | Keyboard Wakeup from Soft-Off |
| • | Power-on mode control for AC |
| | power loss recovery |
 |
|
 | PC Health Monitoring |  |
CPU | • | Monitors CPU Core Voltages, +1.8V, |
| | +3.3V, +5V, ±12V, +3.3V Standby, |
| | VBAT, HT, memory, chipset |
| • | CPU switching voltage regulator |
 |
FAN | • | Up to 6-fan status tachometer monitoring |
| • | Up to six 4-pin fan headers |
| • | Status monitor for speed control |
| • | 3-pin fan support (w/o speed control) |
| • | Low noise fan speed control |
| | (4-pin fan only) |
| • | Pulse Width Modulated (PWM) fan |
| | connectors |
 |
Temperature | • | Monitoring for CPU and chassis |
| | environment |
| • | CPU Thermal Trip Support |
| • | Thermal control for 6x Fan connectors |
| • | I2C Temperature Sensing Logic |
 |
LED | • | CPU / System Overheat LED |
| • | +5V Standby alert LED |
 |
Other | • | Chassis intrusion detection |
Features | • | Chassis intrusion header |
 |
|
|
|
|
|