Superserver 4110
    Modell 4110-T4B-F
 
 Produkte    Systeme    1U    [4110-T4B-F]


Symbolfotos
  Konfiguration


• AMD Opteron® 6300 (Abu Dhabi)
  16/12/8/4-Core CPU HT3.0 Link Support
 

• bis 128GB DDR3 ECC Registered RAM

• bis 4x 2TB HDDs (RAID)

• AMD® SP5100 SATA RAID Controller
• Hardware SAS/SATA RAID Controller mit 1.2GHz
  Dualcore Prozessor und 256MB Cache optional
  Battery Backup möglich

• 1U Rackgehäuse schwarz

• 4x 3.5" Hot Swap Einschübe SAS/SATA

• 4 Lüfter + 1 Netzteillüfter

• 350W hoch-effizientes Netzteil
  (80plus Gold Level zertifiziert)

• AMD® SR5650 Chipset

• 2x Gigabit NIC On-Board

• IPMI Hardware-Fernwartung mit KVM
  (mit eigenem NIC, Funktion auch bei
  abgeschaltetem System)

• DVD-Laufwerk (optional)

• 2 Jahre Garantie (Bis 5 Jahre optional)

• bis 5 Jahre Vor-Ort Garantie optional


Jeder Server wird konfiguriert und betriebsbereit
geliefert! Komplette Installation vor Ort auf Anfrage!






  Product SKUs (Basismodell)
 AS-4110-T4B-F SuperServer 4110-T4B-F (Black)
 
  Motherboard
 Single Opteron® 6000 Serverboard
 
  Processor & Cache
 CPU Single 1944-pin Socket G34
 Supports one 16/12/8/4-Core
  AMD Opteron™ 6000 Series processors
 HT3.0 Link support
 
  System Memory
 MemoryEight DIMM sockets
 CapacitySupport up to 128GB DDR3
  1333/1066/800 MHz memory
 Quad channel memory bus
 MemoryDDR3 1333/1066/800 MHz Registered
 Type ECC SDRAM or Unbuffered ECC/non-ECC
  72-bit, 240-pin gold-plated DIMMs
 DIMM Sizes1GB, 2GB, 4GB, 8GB, 16GB
 Memory1.35V or 1.5V
 Voltage 
 
  On-Board Devices
 ChipsetAMD chipset SR5650 + SP5100
 SATAAMD SP5100 (RAID 0, 1, 10)
 IPMISupport for Intelligent Platform
  Management Interface v.2.0
 IPMI 2.0 with virtual media over LAN
  and KVM over LAN support
 Winbond® WPCM450 BMC
 NetworkTwo Intel® 82574L controller,
 Controllers Dual-Port, Gigabit Ethernet
 10/100/1000BASE-T support
 GraphicsMatrox® G200 16MB DDR2
 Super I/OWinbond® 83627 chip
 
  Add-On Devices (depends on config)
 SAS / SATA RAIDStandard SAS-2/SATA-3 RAID
  Controller 4-Port PCI-E x8 2.0
  with PM8013 Prozessor
 RAID 0/1/1E/10/JBOD
 Global Hot Spare Supported
 128MB DDR2 Cache
 4 internal SAS-2/SATA-3 HDDs
  supported
 Online Capacity Expansion and
 SAS / SATA RAIDHigh Performance SAS RAID
  Controller 4-Port PCI-E/8x
  with 1.6GHz Dualcore Prozessor
 RAID 0/1/1E/5/5EE/6/10/JBOD
 Global Hot Spare Supported
 256MB DDR2 Cache
 4 internal SAS/SATA HDDs supported
 Online Capacity Expansion and
  RAID Level Migration
 Support for SAS expander
 Battery Pack supported (optional)
 
  Expansion Slots
 PCI-Express1 (x16) PCI-e 2.0 slot
  (Riser card required)
 
  Input / Output
 Serial ATASix SATA2.0 (3Gb/s) Ports
 LAN2 RJ45 LAN ports
 1 RJ45 Dedicated LAN supports IPMI
 USB2x USB rear ports
 2x USB on-board
 2x USB internal header
 2x USB front ports
 Total 8 USB 2.0 Compliant
 VGA1x VGA Port
 Keyboard /PS/2 keyboard and mouse ports
 Mouse 
 Serial Ports/1x Fast UART 16550 rear port
 Header 1x Fast UART 16550 front port
 
  System BIOS
 BIOS Type16Mb SPI Flash ROM with AMI® BIOS
 BIOSPlug and Play (PnP)
 FeaturesDMI 2.3
 PCI 2.2
 ACPI 2.0
 USB Keyboard Support
 SMBIOS 2.3
 
  Chassis
 Form Factor1U Rackmount Chassis
 
  Dimensions
 Height43mm
 Width437mm
 Depth503mm
 Weight~20kg (depends on Config)
 Available ColorsBlack
 
  Front Panel
 ButtonsPower On/Off button
 Reset button
 LEDsPower LED
 Hard drive activity LED
 2x Network activity LEDs
 System Overheat LED
 Ports2x Front USB Ports
 1x Serial COM Port
 
  Drive Bays
 Hot-swap4x 3.5" Hot-swap SAS / SATA
  drive bays
 Peripheral Bays1x Slim DVD Drive Bay
 
  Peripheral Drives (depends on config)
 DVDSlim 8x DVD Drive (optional)
 
  System Cooling
 Fans4x 4cm 12.500 RPM fans
 1x Power Supply Fan
 
  Expansion Slots
 1x full-height, half-length PCI expansion slot (Riser Card Required)
 
  Power Supply
 350W AC power supply w/ PFC
 AC Voltage100-240 V, 50-60 Hz, 4.2-1.8 Amp
 +5V18 Amp
 +5V standby3.0 Amp
 +12V29 Amp
 +3.3V15 Amp
 
  Management
 SoftwareIPMI (Intelligent Platform Management
  Interface) 2.0 with KVM support
 Super Doctor III
 Power ACPI Power Management
 ConfigurationsWake-On-LAN (WOL) header
 Keyboard Wakeup from Soft-Off
 Power-on mode control for AC
  power loss recovery
 
  PC Health Monitoring
 CPUMonitors CPU Core Voltages, +1.8V,
  +3.3V, +5V, ±12V, +3.3V Standby,
  VBAT, HT, memory, chipset
 CPU switching voltage regulator
 FANUp to 6-fan status tachometer monitoring
 Up to six 4-pin fan headers
 Status monitor for speed control
 3-pin fan support (w/o speed control)
 Low noise fan speed control
   (4-pin fan only)
 Pulse Width Modulated (PWM) fan
  connectors
 TemperatureMonitoring for CPU and chassis 
  environment
 CPU Thermal Trip Support
 Thermal control for 6x Fan connectors
 I2C Temperature Sensing Logic
 LEDCPU / System Overheat LED
 +5V Standby alert LED
 OtherChassis intrusion detection
 FeaturesChassis intrusion header
 

Druckfehler, Irrtum und techn. Änderung ohne Ankündigung vorbehalten. Genannte Preise sind empfohlene Verkaufspreise. Stand: 10.7.2014